|Place of Origin:||China|
|Certification:||SGS REACH ISO9001:2008|
|Model Number:||SMD 3.2×2.5|
|Minimum Order Quantity:||1|
|Supply Ability:||1 week|
|Model No.:||SMD 3225||Nominal Frequeny:||XTY-27.120MHZ|
|Frequency Stability:||5PPM,10PPM||Operating Temperature Range:||-20℃ ~ +70℃,-40℃ ~ +85℃|
|Certificate:||Rohs SGS||Dimensions:||Electronics Components|
XTY SMD Crystals Oscillator 3225 27.12MHz 10PPM 12PF 3.2*2.5mm 4pin Resonator
The quartz crystal unit shall be subjected to normal atmospheric conditions for 1hr before being tested.
The Units are measured for its frequency and resistance in accordance with Table1 & without mechanical damage,after allowing the crystal to fall freely.
From 75 cm of height 3 times on the firmed wood.
The Units are measured for its frequency and resistance in accordance with Table 1&without mechanical damage afer subjectiong to 2hrs of vibration with 0.75mm amplitude with 10~55Hz frequency sweep 20 times.
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and reach 1×10-3Pa；
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in accordance with Table 1 after dipping into molten solder with the temperature of 320℃±10℃；For 3~4 secs and at a depth up to a point 2.0mm from the base root.
Standard Environmental Condition:
Operating Temperature Range:-20℃~70℃
Crystal Frequency & Resistance will be tested under the following conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Storage Temperature Range:-40℃~+85℃
Lead-free production and RoHS compliance.
High Quality Produce with SGS ,ROHS(JDS OR OEM ) ;
High production capacity;
Professional Electronics Components supplier and over 17 experience TECH
Advanced production line and test equipment from USA,JP,etc.
|Frequency Tolerance(at25℃)||±10PPm ,±5PPm at25℃+/-2℃|
|Frequency Stability vs. Temp(FL-T)||±10PPm,±20PPm ,±30PPm|
|Operating Temperature range||-20~+70℃ -40~+85℃|
|Storage Temperature range||-45~+80℃|
|Temperature Characteristics||±10PPm ±20PPm|
|Load Capacitance||8 to 20 Pf or Serles|
Samples and technical support can be provided free of charge.