|Place of Origin:||China|
|Certification:||SGS REACH ISO9001:2008|
|Model Number:||SMD 3.2×2.5|
|Minimum Order Quantity:||1|
|Supply Ability:||1 week|
|Description:||SMD 3225||Tem:||XTY - 40MHz Crystal|
|Frequency Stability:||5PPM,10PPM||Operating Temperature Range:||-20℃ ~ +70℃,-40℃ ~ +85℃|
40MHZ 15pF 3225 4PIN SMD High Frequency Crystal Oscillator 10PPM
Generally we request the customer to provide the center frequency, type of cutting angle(AT/BT), holder or package type, resistance(ESR), frequency tolerance, frequency stability, load capacitance, operating temperature, drive power, aging, etc, Customer can also specify other specific spec or requirement, if any, when placing orders.
The new Tianyuan in R & D, design, manufacturing, marketing and service as a whole, have a hundred grade purification workshop. The international advanced automated production lines, special test equipment, the latest technology and professional and technical personnel; has been preparing for the new Tianyuan own industrial park, to further expand the research and production of the higher requirements of the product.
Operating Temperature Range:-40℃~85℃
Crystal Frequency & Resistance will be tested under the following conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Storage Temperature Range:-40℃~+85℃
Mechanical property test:
The test can be measured after 1 hours of rest at the reference temperature
The Units are measured for its frequency and resistance in accordance with Table1 & without mechanical damage,after allowing the crystal to fall freely.
From 75 cm of height 3 times on the firmed wood.
The Units are measured for its frequency and resistance in accordance with Table 1&without mechanical damage afer subjectiong to 2hrs of vibration with 0.75mm amplitude with 10~55Hz frequency sweep 20 times.
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and reach 1×10-3Pa；
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in accordance with Table 1 after dipping into molten solder with the temperature of 320℃±10℃；For 3~4 secs and at a depth up to a point 2.0mm from the base root.
|Frequency Tolerance(at25℃)||±10PPm ,±5PPm at25℃+/-2℃|
|Frequency Stability vs. Temp(FL-T)||±10PPm,±20PPm ,±30PPm|
|Operating Temperature range||-20~+70℃ -40~+85℃|
|Storage Temperature range||-45~+80℃|
|Temperature Characteristics||±10PPm ±20PPm|
|Load Capacitance||8 to 20 Pf or Serles|
Samples and technical support can be provided free of charge.