|Place of Origin:||China|
|Certification:||SGS REACH ISO9001:2008|
|Model Number:||SMD 3.2×2.5|
|Minimum Order Quantity:||1|
|Supply Ability:||1 week|
|Description:||SMD 3225||Nominal Freq:||XTY-19.200MHZ|
|Frequency Stability:||5PPM,10PPM||Operating Temperature Range:||-20℃ ~ +70℃,-40℃ ~ +85℃|
surface mount oscillator,
4 pin crystal oscillator
19.200MHZ 3225 4Pin SMD Crystal Oscillator 19.2MHz 10ppm Rohs
1 , Vehicle (front and rear camera navigation)
2 , Mobile phone
a. High Service Quality: OEM & ODM service; Reply in 24 hours; Many years of overseas experience in export. .
b. High Product Quality: Quality inspection in factory and double check in company.
c. Professional Manufacturer: We possess several production bases, gathering over 300 staff, a professional R&D team and many other cooperation manufacturer, all products are directly from factory.
d. Competitive Price: Every order must follow our quoted price rule; We never allowed the higher price.
Standard Environmental Condition:
Operating Temperature Range:-20℃~70℃
Crystal Frequency & Resistance will be tested under the following conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Storage Temperature Range:-40℃~+85℃
The quartz crystal unit shall be subjected to normal atmospheric conditions for 1hr before being tested.
The Units are measured for its frequency and resistance in accordance with Table1 & without mechanical damage,after allowing the crystal to fall freely.
From 75 cm of height 3 times on the firmed wood.
The Units are measured for its frequency and resistance in accordance with Table 1&without mechanical damage afer subjectiong to 2hrs of vibration with 0.75mm amplitude with 10~55Hz frequency sweep 20 times.
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and reach 1×10-3Pa；
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in accordance with Table 1 after dipping into molten solder with the temperature of 320℃±10℃；For 3~4 secs and at a depth up to a point 2.0mm from the base root.
|Frequency Tolerance(at25℃)||±10PPm ,±5PPm at25℃+/-2℃|
|Frequency Stability vs. Temp(FL-T)||±10PPm,±20PPm ,±30PPm|
|Operating Temperature range||-20~+70℃ -40~+85℃|
|Storage Temperature range||-45~+80℃|
|Temperature Characteristics||±10PPm ±20PPm|
|Load Capacitance||8 to 20 Pf or Serles|
Samples and technical support can be provided free of charge.