|Place of Origin:||China|
|Certification:||SGS REACH ISO9001:2008|
|Model Number:||SMD 3.2×2.5|
|Minimum Order Quantity:||1|
|Supply Ability:||1 week|
|Size:||3.2*2.5mm||Frequency Tolerance (at 25°C):||10PPM|
|Driver Level (Typical):||100µW||ESR:||40Ω|
crystal clock oscillator,
automotive grade electronic components
SMD Passive Electronics Crystal Oscillator 3225 24MHz 10PPM For Mobile Phone
The function of crystal oscillator is to provide basic clock signal for the system. Generally, one system shares one crystal oscillator to keep the parts synchronized. Some communication systems have different fundamental frequencies and radio frequencies using different oscillators, while maintaining synchronization by electronically adjusting the frequency.
Standard Environmental Condition:
Operating Temperature Range:-20℃~70℃
Crystal Frequency & Resistance will be tested under the following conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Storage Temperature Range:-40℃~+85℃
The quartz crystal unit shall be subjected to normal atmospheric conditions for 1hr before being tested.
The Units are measured for its frequency and resistance in accordance with Table1 & without mechanical damage,after allowing the crystal to fall freely.
From 75 cm of height 3 times on the firmed wood.
The Units are measured for its frequency and resistance in accordance with Table 1&without mechanical damage afer subjectiong to 2hrs of vibration with 0.75mm amplitude with 10~55Hz frequency sweep 20 times.
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and reach 1×10-3Pa；
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in accordance with Table 1 after dipping into molten solder with the temperature of 320℃±10℃；For 3~4 secs and at a depth up to a point 2.0mm from the base root.
|Frequency Tolerance(at25℃)||±10PPm ,±5PPm at25℃+/-2℃|
|Frequency Stability vs. Temp(FL-T)||±10PPm,±20PPm ,±30PPm|
|Operating Temperature range||-20~+70℃ -40~+85℃|
|Storage Temperature range||-45~+80℃|
|Temperature Characteristics||±10PPm ±20PPm|
|Load Capacitance||8 to 20 Pf or Serles|
The new Tianyuan in R & D, design, manufacturing, marketing and service as a whole, have a hundred grade purification workshop. The international advanced automated production lines, special test equipment, the latest technology and professional and technical personnel; has been preparing for the new Tianyuan own industrial park, to further expand the research and production of the higher requirements of the product.
Samples and technical support can be provided free of charge.